Brief introduction

Through many years research and development, Small swing turnstile is a high-tech product which mainly provides intelligent management to passageway.This product is finely processed with complete functions and high Level, especially suitable for baggage and disabled persons,etc.

This equipment is subtly integrated with machine, electronics, micro-processor control and ID identification, provides convenience for the use of card reader identification equipments, such as IC card, ID card, bar code and fingerprint.,etc. It can carry out intelligent control and management to the passageway through choosing various identification equipments

Product Picture

Technical parameters

  • Housing material : domestic 304# stainless steel (1.0~2.0mm)
  • Working voltage : AC220±10%V 50±10%HZ
  • Driving motor : DC24V brush motor
  • Size: diameter : main pole: Φ168mm attached pole: Φ88mm height: 1050mm
  • Distance of attached and main pole : >swing arm length
  • Passage width : 500mm ~830mm
  • Swing arm angle : 180 degree
  • Direction : single or bi-directional (optional)
  • Working environment : indoor/outdoor (with a tent over) -10℃～70℃ Relative humidity : ≤90% coagulation free
  • Time of opening/closing : 1 second
  • Pass speed : 40 persons/min (open), 25-30 persons/min (closed)
  • Time to work after power on : 3 seconds
  • Reset time after break down : 10 seconds
  • Normal running life : 3 million
  • Communication interface : standard RS485 interface, distance ≤1200m
  • Input interface : +12V level signal or pulse width>100ms 12V pulse, drive current>10mA

Standard Functions & Features

  1. The gate is Bidirectional, according the infrared sensing to enter and exit the passageways.
  2. Turnstile can setting the working condition by press the button of main control board.
  3. Anti-pinch function: turnstile have Mechanical/ infrared induction Anti-pinch functions( when it is meet the hinder during the reset time, the electrical machine closed work automatically in specified time, the turnstile will default the delayed and reset again till reset succeed)
  4. The turnstile will lock when somebody enter the gate illegal, Tailgating or break into negative direction gate.
  5. Before received the open signal, the turnstile will lock automatically
  6. The arm have the collision avoidance function: when the turnstile arm closed, if it is under the collision, the arm will open to protect the Transmission of inner machine.
  7. Automatic Reset Functions: after you swap the card, during the specific time (the system is 10s), if you didn’t pass the turnstile, the system will cancel your authority automatically to pass the gate, (reset time is 1~60s you can adjust it what time is suit for you). totally meet the fire protection needs
  8. The turnstile can work with door access control system/ consumption system /biometric recognition system/ ESD system and so on
  9. The turnstile is bidirectional (pedestrian can enter and exit from one pair of turnstiles)
  10. Can manager and long-range control the turnstile directly by managing the computer

Extended function

  1.  pillar can heighten , telescopic arm lengthen, can choose materials
  2. Infrared reset function & Infrared induction clamp function
  3.  Sound and light alarm prompt functions
  4.  Normally open or closed can be adjust to meet the requirements of the different place.

Product Picture